|
|
1980 Z28 camaro repainted black solid body,4" cowl induction hood and comes with stock z28 hood,crager wheels,all new tires,10 bolt posi rear end with 4:10 gear and traction bars,turbo 350 transmission with bm shift kit and 3900 rpm stall convertor,BM super shifter, The engine is a 350 4 bolt main,trw forged dome pistons good crank rods all balanced, Roller cam,roller rocker arms, dart heads with port matched victor jr intake,high performance HEI distributor,demon 4 barrel carb. The interior is pretty much stock we installed new carpet and many gauges also has 5"monster tach. This was a father son project car 4 years ago we started with a solid Z28 body with no rust we painted it with base coat clear coat it was wet sanded but could still use a good buff job. The car runs and drives. The roller cam has extremely high lift so the power brakes don't work well at idle. We installed open chamber dart heads to lower the compression so it woud run on pump fuel this worked but we lost top end power due to the high lift cam. The body has some scratches on the bottom of the doors and rocker panels where jack stand rubbed on each side while trailering the car to the drag strip. for more info contact Mike @ 262-623-2308
|