|
|
|
|
|
|
|
Oldsmobile : Cutlass
|
|
|
Time left: |
(7/28/2008 12:07:03 AM) |
Seller: |
|
Bids: |
9 |
jebholton |
|
Current Bid: |
USD 4051.01 |
|
|
|
|
|
|
|
|
Up for sale is my 1981 Oldsmobile Cutlass Supreme. The vehicle is painted Bronzemist metallic. The body is solid as well as the frame. The drivers floor pan has been replaced with new molded sheet metal that is completely welded in. The car runs and drives great. It is very fast. The 455 engine makes tons of torque. I have only put about 7,000 miles on the engine. The TH350 transmission is very strong. The car has American Racing Torque Thrust D wheels and BFG Radial T/A tires. There are an extra set of Torque Thrust wheels with Mickey Thompson ET Street tires that are 8.5 wide and 26" tall that have about 7 passes at the drag strip on them. The car runs 11.94 at over 117 mph on the motor. I do have an Edelbrock Performer RPM Nitrous system on the car. I have never been able to get traction on the small tires with the nitrous. I do have video on myspace that can be viewed. Just message me and I'll give that info out. The car has a competition engineering 8 point roll cage welded to the frame as well as racing bucket seats and 5 point harness. The speedo is not hooked up at the tranny because the adaptor leaked. There are a few cracks in the paint around where the hood scoop is attached to the hood. Also the nitrous solenoid leaks and needs to be rebuilt ( I left the bottle on and it wrecked the seals, about $40 for a rebuild kit). Everything else on the car works and looks great.
455 Olds engine bored .040 over balanced and blueprinted
Keith Black Hyperutetic 9.7 to 1 compression ratio
Olds "C" heads ported with 2.072 intake and 1.71 exhaust Manley swirl polished under cut valves
Comp roller rockers
Comp Extreme Energy dual pattern cam XE274H
Edelbrock performer 455 intake
Speed Demon 750 race carburator
Edelbrock Performer Nitrous system
Holley Blue fuel pump
Dual electric fans
Howe aluminum radiator
MSD 6AL ignition
MSD Billet Distributor
MSD plug wires
TH350 trans with shift kit
BM Hole Shot Torque converter
Custom driveshaft
Auburn Posi with 3.73 gears
American Torque Thrust D wheels
BM Mega shifter
Stuart Warner guages
Hooker Super Comp headers with 3" Flowmaster 2 chamber mufflers
8 Point Competetion Engineering Roll Cage
Dual racing bucket seats with 5 point harness
2 additional Torque Thrust D wheels with Mickey Thompson ET street tires almost new
A lot of poeple have asked to see the video of the car so here is the link to myspace www.myspace.com/1fast455
|
|
|
|