|
|
|
|
|
|
|
Plymouth : Plymouth
|
|
|
Time left: |
(7/13/2008 7:00:00 AM) |
Seller: |
|
Bids: |
17 |
72transamblue |
|
Current Bid: |
USD 6072 |
|
|
|
|
|
|
|
|
Vehicle Description
The car has a 1978 truck 318 Chrysler motor stock, but for the Edelbrock performer intake and a 600cfm Edelbrock Carburetor. The motor has a high volume oil pump and a MSD distributor with MSD Ignition system, Blaster coil. The car has an Electric fuel pump with a Holly pressure regulator. It also has Stainless braided Fuel line from back to front. The Car is equipped with a Painless wiring harness it has a B&M Quick Silver shifter. The motor has Hooker Ceramic coated block hugger headers. The car has a Mustang 2 rack pinion and a 1978 9”Ford maverick rear axle the brake booster is under car not on the fire wall. The car chassis was sand blasted and primer and painted gray. The transmission is a 727 Chrysler. The body was taken off chassis and new floor pans put in except in the trunk and under back seat. Then all underneath the body was aluminum sheeted and sealed. The battery is in the trunk. I have the hood and side skirts and rear bumper. The rear fenders and running boards also front fenders will need to be fished and painted, all the body work has been finished there is the hood and noise piece needs to be painted. I have the front glass and one piece of glass for templates to make new glass for the doors and back window. Has an ididit chrome tilt steering column. The car also has a poly from fuel tank. All new brake lines and hoes. The Car is all solid metal. The car also has Haneline pewter Gauges. Chrome wheels.
|
|
|
|